RushFPV Rush Blade 32bit 60A 3-6S 128khz 4in1 ESC AM32 Firmware – Extreme Edition (30*30)

RM355.00

Availability: 10 in stock

The Rush Blade 60A 3-6S 128kHz 4-in-1 ESC Extreme Edition by RUSHFPV features, front & back special process aluminum shell, F4 MCU 200MHz with am32 Firmware, 24kHz-128KHz PWM frequency 3oz dual board and 40V rated MOSFET.

TIP: ESC factory firmware updated to AM32 firmware

FEATURES
  • 32-bit microprocessor running at a frequency of up to 200MHz for an excellent performance.
  • Supports up to 128K PWM frequency, so the response speed is faster and smoother, reducing mid-throttle oscillations.
  • Equipped with double-sided lightweight metal armor to avoid hardware damage caused by crashes, and the armor can effectively assist the MOSFET to dissipate heat.
  • Double PCB board design, high current circuit, and signal circuit are independent of each other.
  • All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also causing active freewheeling.
  • Supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
  • Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up, No need for throttle calibration.
  • All codes use damped light mode. Damped light mode does regenerative braking, causing very fast motor retardation, and inherently also causing active freewheeling.
  • Supports beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding a lost drone.
SPECIFICATIONS
  • Rated Current: 60A
  • Peak Current: 80A
  • Input Voltage: 3-6S Lipo
  • MCU: F4 @ 200MHz
  • PWM FREQ: 24-128KHz
  • LED Color: Orange
  • Weight:16.5g
  • Dimension: 45*36.5*7.5mm
  • BL32 FW: RUSH_BLADE_EXTREME
INCLUDES
  • 1x Rush FPV Rush Blade 60A 128kHz 3-6S 32Bit 30×30 4in1 ESC – Extreme Edition
Category: Tag:
Shopping Cart