FETtec AIO 35A
FETtec AIO 35A
FETtec AIO 35A
FETtec AIO 35A
FETtec AIO 35A
FETtec AIO 35A

FETtec AIO 35A

Regular price RM480.00 MYR RM0.00 MYR Unit price per

Features:

FC:

  • Latest STM32G4 Processor

    • 170Mhz + Math accelerator

    • MPU6000

  • Supply voltage 12-25V (3S-6S Lipo voltage)

  • 2x dedicated onboard 5V BEC for VTX (max. 600mA each)

    • 5V BEC for RX

    • 5V/16V BEC for VTX (switchable and real Pit*)

  • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems

    • VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

  • 2x 4 pin connector for receiver and VTX

    • Signal, telemetry, 5V, gnd

    • Gnd, 5V, TX1, RX1

  • 5 UART serials

    • UART 1 free

    • UART 2 used for Receiver

    • UART 3 free

    • UART 4 used for onboard OSD, can be set free

    • UART 5 used for ESCs / TLM / Onewire

  • Solder pad for RGB LEDs

  • Supported ESC protocols

    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

  • KISS FC firmware

 

*real Pit-Mode: A power supply pin which is remotely switchable

 

ESC:

  • Active current limiting @ 35A

  • Input voltage: 3s-6s

  • High quality 40V MOSFETs

  • STM32G071 @ 64MHz

  • up to 128 kHz Motor PWM

  • Full sine wave control
  • Automatic input signal detection

    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

  • FETtec ESC firmware



OSD:

  • Onboard OSD

    • Graphic OSD (STM32)

    • Full KISS Tuning

    • Filter (PIDs, Rates, Settings)

    • LED control (RGB LED, Racewire)

    • VTX

    • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)

    • KISS GPS support + live map

    • Custom graphic pilot logo

    • Stick overlay

    • Custom layout

    • can be deactivated for usage of digital systems

 

  • Connector type: JST-SH-1mm

Dimensions:

  • Maximum outside dimensions: 30 x 37,5mm

    • Mounting hole arrangement: 20 x 20mm with M2 mounting hole (expandable to M3)

  • Overall height: 7,9mm

  • Weight: 8,9 g

Software: 

KISS Firmware - Softwareupdate via FETtec Configurator

FETtec ESCs Firmware - Softwareupdate via FETtec Configurator

FETtec OSD - Softwareupdate via FETtec Configurator

Scope of delivery:

1x FETtec AIO 35A

1x Capacitor 50V 470µF

2x 4 pin cable with JST connector on one side

1x 8 pin cable with JST connector on one side

Standoffs

Related links to "FETtec AIO 35A"